hot runner system
hot runner system
热流道
câmara quente
CANAUX CHAUDS|CANAUX CHAUDS système des moules|CANAUX CHAUDS système en Chine
alergător la cald|alergător la cald China
горячеканальная плесень|китайский производитель горячеканальных систем
Sistema de moldeo por inyeccion fabricados en China
Moldes de injeção sitema de injeção fabricante China
Горячеканальная|Горячеканальная система вытворца
nhựa phun keo nóng|Hệ thống phun nhựa đuôi keo nóng nhà sản xuất
COLADA CALIENTE|ANOLE SISTEMA DE COLADA CALIENTE

Home > blog >

Valve gate hot runner needle motion

Date:2013-06-29

Valve gate hot runner needle motion


With respect to common hot runner system, valve gate hot runner system has higher technical content. The common main problem is valve gate hot runner needle motion not smooth.
When appear this phenomenon, firstly, engineer should check whether the pressure enough or not. Also need check gas route and tightness is good. Secondly, check concentric of cylinder, manifold and nozzle. if not, needle won’t move smoothly. Thirdly, examine material leakage problem between valve gate needle and guide bushing. If the other is without problem, check the machining sizes. At least, injection molding machine signal connection incorrect and sprue bigger problem will cause this problem.
Anole hot runner is a research and development, production line and service line of integrated technology-intensive enterprises, which will help you solve hot runner professional problem. Welcome consultation.
contact: Candy
SKype: anole-hc-02
MSN: anole-hc-02@hotmail.com

Quick SearchSearch Products&News

Download Center

Contact Us

  • Quality wins the market,Quality comes from Responsibility
  • Add:369# XinJiang Rd., Xinqian Street, Huangyan Taizhou, Zhejiang, China
  • Tel:+86-576-81106952
  • Fax:+86-576-84018996
  • E-mail:
    service5@anole-hot-runner.com       

          anole-hc-02@hotmail.com