hot runner system
hot runner system
câmara quente
CANAUX CHAUDS|CANAUX CHAUDS système des moules|CANAUX CHAUDS système en Chine
alergător la cald|alergător la cald China
горячеканальная плесень|китайский производитель горячеканальных систем
Sistema de moldeo por inyeccion fabricados en China
Moldes de injeção sitema de injeção fabricante China
Горячеканальная|Горячеканальная система вытворца
nhựa phun keo nóng|Hệ thống phun nhựa đuôi keo nóng nhà sản xuất

Home > blog >

problem of injection products and solution


Anole hot runner system produce high precision, high quality office supplies, food packaging hot runner hot runner products, auto mould of hot flow path and cap hot runner products, at the same time, face with these we can't avoid defects injection product problem . Anole hot runner has a series solution methods to solve these problems.
Warm remind you to pay attention to the following these plastic products are prone to defects.
A, lack of material
the injection pressure is too small
the injection speed is too slow
the cavity venting is not good
the nozzle blocking jam
the injection time is too short
shoot tip leak adhesive

Second, the flash flashes
the injection pressure is too great
the mould clamping imprecise, clamping force is too small
die combining untight seal, die with sundry or template deformation
the mould a defect
Three, bubble plastic raw materials and wet
decomposition of plastic raw materials
the forming temperature is too low

the bad welding
plastic raw materials mixed with impurities
Surrounded by u insert plastic thickness is not enough
mold temperature is too low
water entry position design is not reasonable
damp of plastic raw materials

 Plastic injection product problem are common exist ,we have more solutions.Any necessary welcome to contact me freely.





Quick SearchSearch Products&News

Download Center

Contact Us

  • Quality wins the market,Quality comes from Responsibility
  • Add:369# XinJiang Rd., Xinqian Street, Huangyan Taizhou, Zhejiang, China
  • Tel:+86-576-81106952
  • Fax:+86-576-84018996
  • E-mail: