normal multi-tips large gate hot runner
Anole hot runner normal multi-tips large gate nozzles are with large flow and excellent color change capability. It can process the front end to meet requirements of the cavity and gate. It is applicable for crystalline and low flow plastic parts, with good interchangeability.
· Multi-tips large gate nozzles are suitable for the gate on the incline side of plastic products and smaller waste than normal gate nozzle
· Multi-tips large gate nozzles is applicable for low-flow plastic
· Multi-tips large gate nozzles can change color directly
· Multi-tips large gate bush and nozzle are structured separately, easy to exchange.
· Multi-tips large gate mould need not heat treatment, while heat treated bush with longer service life.
· Multi-tips large gate nozzles use standardized bush, easy to exchange.
· Multi-tips large gate nozzles bush is close to nozzle heating coil, which is good for thermal conductivity
· Multi-tips large gate nozzles are suitable for big plastic parts like bumper, instrument panel mould and so on...
- Total 1page3records
Quick SearchSearch Products&News
Download Center
Contact Us
- Quality wins the market,Quality comes from Responsibility
- Add:369# XinJiang Rd., Xinqian Street, Huangyan Taizhou, Zhejiang, China
- Tel:+86 138-5865-8631
- Fax:+86-576-84018996
- E-mail:
service5@anole-hot-runner.com
