hot runner system
hot runner system
热流道
câmara quente
CANAUX CHAUDS|CANAUX CHAUDS système des moules|CANAUX CHAUDS système en Chine
alergător la cald|alergător la cald China
горячеканальная плесень|китайский производитель горячеканальных систем
Sistema de moldeo por inyeccion fabricados en China
Moldes de injeção sitema de injeção fabricante China
Горячеканальная|Горячеканальная система вытворца
nhựa phun keo nóng|Hệ thống phun nhựa đuôi keo nóng nhà sản xuất
COLADA CALIENTE|ANOLE SISTEMA DE COLADA CALIENTE

Home > blog >

Mechanical Strength Considered in Hot Runner Manifold

Date:2013-08-14

Mechanical Strength Considered in Hot Runner Manifold

It is a fundamental requirement that hot runner manifold should have sufficient mechanical strength to bear the pressure from melt plastic in the runner. So thickness of hot runner manifold should be managed properly. If the manifold is too thin, then the mechanical strength will be weakened. If the manifold is too thick, then the volume and weight of manifold will increase, which will lower the heating speed, wasting electricity. Meanwhile, it will increase the height of the mould. Generally, the thickness of manifold is between 30 mm to 50 mm, in H13 Steel.

Anole injection technology Co., Ltd is a professional hot runner manufacturer in China. We use heating elements from Germany GC Corporation and adopt advanced Portuguese technology. We export hot runners to Europe, Southeast Asia,South Africa and so on. We won good reputation on international market, because of our good quality and reliable hot runner service.

hot runner manifold
 

 

Quick SearchSearch Products&News

Download Center

Contact Us

  • Quality wins the market,Quality comes from Responsibility
  • Add:369# XinJiang Rd., Xinqian Street, Huangyan Taizhou, Zhejiang, China
  • Tel:+86-576-81106952
  • Fax:+86-576-84018996
  • E-mail:
    service5@anole-hot-runner.com       

          anole-hc-02@hotmail.com