international hot runner system brand

International hot runner system brand introduce:

Asia hot runner system brand ,Yudo hot runner and Hotsys from Korea,Matip from New Zeeland.

Demi
Eml:service1@anole-hot-runner.com
Skype:anole-hc-03

international hot runner system brand

International hot runner system brand introduce:

Asia hot runner system brand ,Yudo hot runner and Hotsys from Korea,Matip from New Zeeland.

Demi
Eml:service1@anole-hot-runner.com
Skype:anole-hc-03

 open gate nozzle color changing process

Hot runner system change color step:

1. Worker use new colored plastic to clean the injection machine charging barrel.
2. All temperature of the hot runner system heating zone increase 10~20℃,but lower the plastic processing temperature
3. Inject 10~15 times to closed mould until the old colored plastic just show beside the gate around.
4. Turn off the hot runner system heating and break off mould cooling of temperature system.
5. Heating the hot runner system handling temperature.
6. High speed inject until get the even colored plastic.

Demi
Eml:service1@anole-hot-runner.com
Skype:anole-hc-03

 Anole hot runner supply hot runner nozzle, manifold, hot runner temperature controller and the spare heating elements. We are supply not only a goods, but a fine solution for the injection molding field.

Anole hot runner specializing in the production of multi-cavity mold hot runner system, hot runner system, hot runner temperature controller, large car mold hot runner, medical products hot runner, we are the professional office supplies hot runner manufacture, we also devote to food packaging hot runner and LED light guide plate hot runner field…

Welcome any new project or any confusion in the molding FAQ, Please just inform me. Tina will help to serve you well.

 Anole  hot runner system company in order to offer customer high quality hot runner manufacture line, Offer stable German heating elements and spare effort to serve customer excellent service

Multi-cavity hot runner mould during  use process, customer is mostly concerned about a problem that is the runner forming balance problem.

According to this problem, Anole hot runner company has a detailed solution, can guarantee the injection balance, and get high precision plastic products.

So, we will first customer to make a detailed mold flow analysis, customer confirm our scheme for the mold flow analysis, give the customer to work out a detailed design scheme. Believe that customers will see our effort and trust our goods.

Welcome to visit our company to discuss the project detail, Tina is here waiting for your any confusion and help you solve balance problem.

Written by Tina

In the every injection ,cold runner cost waste of plastic material. In the process of molding plastic parts,
multiple cavity cold runner system will cause a lot of waste of raw materials, which makes the profit space molding is seriously damaged.
Cold runner has the advantage of easy to use, also can well meet the demand of some beautiful.
Cold runner to reduce injection to pervious to light transparent acrylic ester or polycarbonate parts, such as avoiding the cause visible in some parts of strip effect.
For the cold runner shortcomings, in addition to the waste of raw materials, the defect of cold runner including the whole process of automatic or manual added steps.
Removed from the part of the mould, will be the cold runner need robots or workers to get the parts from port.
According to the size of the flow channel, the value of waste could reach hundreds of thousands of dollars, especially for expensive materials such as polycarbonate.
For more cavity system, cold runner may not entirely as desired.
In the case of multi-cavity, gate more plastic than the amount of injection molding parts.
But hot runner can solve this problem, it can effectively increase the amount of a single cavity, because gate in the entire process of processing, in the molten state.

Ashely

Email:service1002@anole-hot-runner.com

Skype:anole-05 

 HRS (hot runner system) is consist of manifold,heating nozzle and temperature controller. The hot runner manifold can be classified into I-shaped,X-shaped,Y-

shaped,square shaped and so on.

For normal plastic products manufacturer, hot runner system would be an economical choice for mass production.That's because the hot runner system reduce the wasted

material in the cold runner system. Sometimes, the wasted material use the same quantity of material than the production. After calculation, the hot runner system can

save 30%~50% material. Also, hot runner system can avoid some abrasion of the mould, to longer the mould life. Gernerally, the hot runner system mould is twice mould

life of the normal mould.

The components of hot runner system is quite simple, but every part plays important role in the whole system. The heating elements is quite important for a good hot

runner sytem.Anole hot runner system use heating coil from German Hotset and manifold heater from German GC. They are the most durable and stable heating elemets in

German.We use high hardness steel for manifold and Beryllium Copper for nozzle tips. The nozzle has direct gate,pin point gate and valve gate. The temperature

controller has imbedded temperaturer and intelligent temperaturer.

Anole hot runner system can provide you high quality HRS in China.

If you have any inquiry for hot runner system,please do not hesitate to contact me.

Abby
Eml:service8@anole-hc-01
Skype:anole-hc-01
Tel:+86 138-5865-8631

Hot runner system safety handling

Demi written
Eml:service1@anole-hot-runner.com
Skype:anole-hc-03

hot runner moldflow software introduce

• moldflow plastics advisers
• Moldflow plastics insight
• Moldflow plastics xpen

Anole is professional hot runner system maker in china. Plastic is the center part of the hot runner we should care much with it. Here i want to introduce the Plastic performance requirements of hot runner system

Frist,a large meting temperature , plastic better be the kind that very well flowing condition in the low temperature and well stability in the high temperature. Second, the viscosity can be very litte changed by the changeable of the temperature. Visicisity and flowing change very litter when the pressure is changed. And plastic can flow fluently when it is in a very low pressure. Third, High curing temperature and thermal deformation temperature. In the condition of high temperature , the production can be cooling quickly and the transformation will not exict and the cycle time can be shorten Fourth, High heat transfer coefficient , thermal conductivity are good so that products can rapid cooling in the mould. Low specific heat so that the plastic is easy melting and solidification. These are the plastic performance requirements of hot runner system.

If you are interested in hot runner system , anole can be you r best choice to cooperate . Please feel free to contact me .

Contact : Lenny
Skype: anole-4
E-mail: sales9@sinomould.com