Gas-assisted injection molding is widely used in making uneven wall-thickness products. since such products are very different to make and need high technology to maker them. We can provide customers such a art. because  we know gas-assisted injection molding merits and gas-assisted injection molding advantages. 

gas-assisted injection molding merits are as following: first , the cost of equipments will reducing when using this technology to make products since this technolgy use "underfeeding injection" ,to make the fusant's filling of the mold cavity is accomplished under the pushing force of gas in the fusant . so te injection pressure and locking force will be low.  second, since the injection pressure is lower than others so the distortion of the products will be slight warp. Third,  is that the surface quality of the products will be very high. since the pressure in the  hollow part are use the dwell pressure so that pressure will distributed uniformed.  Forth, it can be use to make products with diverse wall-thickness. Fifth,because the gas-asisted injection molding have small injection volum .so the production cycle will be short . last but not the least , it can saving plastic materials for gas in the cavity occupied part if the volume. those are  some advantages of gas-assisted injection molding.

 

if you are interested in gas-assisted injection mould or hot runner and other moulds , please let me know, we know well about gas-assisted injection molding merits and gas-assisted injection molding advantages. And we can be you best choice.
Written by : Lenny      Skype: anole-4
Email: service2@anole-hot-runner.com

Anole is a professional hot runner system supplier. We provide customers various kinds of hot runner parts. We also have various kinds of runner for customer to choose.such as the balanced manifold runner and the unbalanced manifold runner .
The balanced manifold runner is that all runners have identical length,shape,and sectional dimensions.from the sprue to each cavity. The design is to ensure each cavity has a balanced material flow and is filled out at the same time. The different between balanced manifold runner and the unbalanced manifold  runner is that the the length from sprue to the each cavity is different. Unbalanced manifold runner have the features that 1.the size of the sprue (near the gate) is greater than that far away from the mainstream gate size.2. distributary channel can't be too long, or the temperature, pressure may will make the cavities which are far away from the mainstream difficult to fill.3.with the unbalanced distribution ,the distributary channel length will be short thq=an that of the balanced distribute.4. if the subchannel is too long , we can longer the head size od the head size along the direction of melt slag hole so that the cold material is not into the cavity. 5. When layout the runner and the cavity, the center of the plastic projection area must in line with the injection molding machine clamping force line.

If you are interested in hot runner system, the balanced manifold runner and the unbalanced manifold runner. Please feel free to contact me.
Written by :Lenny
Skype:anole-4
Eml : service2@anole-hot-runner.com

Need unusual chair moulds?A mould manufacture--Sino,won't let you down.Sino has rich experience in mould production.And it is well known for it can produce various types of chair moulds.Weare sure to provide our customers satisfied chair moulds what they want.

Anole hot runner injection molding technology co. is a high-tech mold injection system manufacture enterprise, and it is found with 8 million of registered capital in 2000. It is one of the main hot runner system manufactures in china. The products are exported to many countries such as France, America, Australia, New Zealand, etc.Anole mainly produces products of hot runner which conclude three parts: the nozzle, the splitter plate, the temperature control box.

Nozzle concludes three series: pin-point gate series, gate series and valve series. All of them are made of steel with good quality and thermal conductivity. We also use German heating element, ensuring heating speed. The hot runner nozzles of our company can provide costumers no-waste processing leave out complicated process and easy to realize automation of high-speed injection molding.

In the manifold area, anole injection molding technology Co. ltd researches and develops X type, H type, I type, Y type, etc. When design the manifolds, our company is careful on every detail such as small fluctuation of viscosity, stability temperature of melt, small pressure loss in the flow channel of the melt, appropriate flowing rate of melt, etc. The manifolds designed and produced are without dead angle, easy to eat, precise in temperature controlling, runner balance and a series of advantages are to gain the user's high praise.

The temperature control box have three types: card temperature control box, intelligent temperature control box, timing temperature control box, touching temperature control box. No matter what kind of temperature control box, we have strict technology to realize precise temperature controlling (±1Cº), the automatic recovery from disturb, stability, reliability, wide applicability and other features can fit the user's operation habit.

The production of anole hot runner injection molding technology Co.ltd is widely used in family appliance, automobiles, office equipment, personal care, toys and many other plastic areas. What’s more, Anole has a number of practical experience and technical workers to provide customers with general or special needs of injection system, and at the same time provide perfect after-sale service.

If you are interested in  our hot runner equipment please not hesitate to contact us.

Contact: Winni

Skype: anole-022

Hot runner temperature controller manufacturer

Temperature controller is a equipment that can constantly remain the temperature of hot runner system. It is consisted of temperature control card, air-break switch, box, fan, wire holder and cable. Temperature controller detects the temperature of hot runner system, through inner temperature control card, remain the temperature stable by adjust output power. Temperature controller is controlled by microprocessor and temperature control accuracy is 0.5 ℃.
Anole temperature controller includes embedded temperature controller box, intelligent temperature controller box, sequential temperature controller box and touch-screen temperature controller box. Anole Injection Technology Co., Ltd is a professional hot runner temperature controller manufacturer. We offer high quality temperature controller with reasonable price. We are hot runner temperature controller manufacturer who exports our products to Europe, Southeast Asia, and South America and so on.

If you are interested in our product , please do not hesitate to contact us.

Contact: Abby
Skype: Anole-023
Eml: service8@anole-hot-runner.com

 

Important Hot Runner Manifold Steel

Corrosion resistance, Abrasive Resistance and Hardness should be considered are important for hot runner manifold steel.
Hot runner manifold steel should have enough corrosion resistance, abrasive resistance and hardness, when designing the hot runner manifold. As many kinds of fiberglass reinforced plastic will wear mould parts and hot runner manifold, so the hot runner should be good in abrasive resistance. At the same time, hot runner manifold has to reduce the contact area with the mould, preventing heat loss. As the contact area is smaller, the local mechanical pressure will increase, so the hot runner manifold steel should have enough hardness to endure the higher mechanical pressure.
 

Anole Injection Technology Co., Ltd is professional in hot runner manufacturing. We signed German GC Corporation as heating elements partner. At same time, we adopt advanced technology from Portuguese. We won excellent reputation in international markets for high quality and good after service.

Contact: Abby
Skype:anole-023
Eml: service8@anole-hot-runner.com

 

Mechanical Strength Considered in Hot Runner Manifold

It is a fundamental requirement that hot runner manifold should have sufficient mechanical strength to bear the pressure from melt plastic in the runner. So thickness of hot runner manifold should be managed properly. If the manifold is too thin, then the mechanical strength will be weakened. If the manifold is too thick, then the volume and weight of manifold will increase, which will lower the heating speed, wasting electricity. Meanwhile, it will increase the height of the mould. Generally, the thickness of manifold is between 30 mm to 50 mm, in H13 Steel.

Anole injection technology Co., Ltd is a professional hot runner manufacturer in China. We use heating elements from Germany GC Corporation and adopt advanced Portuguese technology. We export hot runners to Europe, Southeast Asia,South Africa and so on. We won good reputation on international market, because of our good quality and reliable hot runner service.

 

Hot Runner System in China

Hot runner system is an advance system, which is applied to the injection plastic mould gating system. Hot runner system keeps plastic melt in the runner and gate. Generally, hot runner system consists of nozzle, manifold, temperature controller and other accessories. Nozzle includes pin point gate nozzle, direct gate nozzle and valve gate nozzle. Hot runner system in China is gradually widely used now.

Hot runner system will save the cost of raw material, as there are no waste materials. Then, you do not need to spend time to break waste materials into pieces. It will save the cost of handling waste material. Hot runner system can decrease molding cycle, as there is no need to push out waste materials.

Anole Injection Technology Co., Ltd is a professional hot runner system manufacturer. We use advanced Portuguese DH technology and German heating elements from GC Corporation, using advanced hot runner manufacturing equipments. Anole is famous for its hot runner system in China. Anole products are sold to Europe, Southeast Asia, South Africa and so on. We have a lot of agents and service centers in different countries.

Contact:Abby
Skype:anole-023
Eml: sales8@sinomould.com

 

The controlling system of our temperature controller box adopt high intelligent instrument to achieve precise temperature control. On the base of high quality talent and perfect management system, we continuously study new technology, implement new programme, launch new products. Additionally, anole injection tecnology Co.Ltd can offer you different kinds of temperature controller boxes such as intelligent temperature controller box, card temperature controller box, touch-screen temperature controller box, multi-functional controller box. What’s more, we can design and produce particular temperature controller box according to your special demand. We can also offer you other hot runner equipments. We are sure to provide you not only a product but also a fine solution.

If you are interested in purchasing our temperature controller box, please not hesitated to contract us.We would be glad to learn your inquiry and provide you perfect service.

Contact: Winni

Skype: anole-022

Email: service6@anole-hot-runner.com

anole injection technology company is a professional hot runner supplier company. We have specialized in this line for over ten years. Thermal insulation runner usage is one of the simplest in the hot runner system. So know i’d like to introduction you thermal insulation runner usage and thermal insulation runner application .
Thermal insulation runner can be very advantageous ,when the mold is used under occasions that require constant change of colors or materials. Because when using such insulative runner, there requires uninterrupted production and rapid production cycles, since when the production is interrupted, the runner will solidify, and under such occasion the runner must be removed so that new insulative runner can form. thermal insulation runner normally used in the multi-cavity mold. The poor thermal conductivity of the molded material in the hot runner as well as the large section of the runner cause the core part to fuse, and the core part passing through the runner keeps injection new fused materials into the mold, which meanwhile also preserve s the fusion state of the core part. When this principle used in a multi-cavity mold then a thermal insulative runner will be form. Please pay a attention that a small coical mark of the gate will left on the molded products, since the inner surface of the main sprue and the gate connecting with the cavity must be conical so that the solidified plastic within the gate can be drawn out with the product during each injection cycle.